ATMA, ATMATIC GS1216(6) | RH Solutions LLC.

ATMATIC GS1216(6)

AUTOMATIC GLASS PANEL SCREEN PRINTER

Go

Back to Product List

Get a Quote

Combined 3-in-1 Machine

Centering Conveyor, Screen Printer, and Outlet Conveyor fully integrated into a single system. Each of the three units has an independent conveyor, interconnected electrical controls, and synchronous leveling orientation of substrate to achieve fully automatic in-line processing.

Automatic Registration Pins

Automatic registration pins on inlet conveyor platform and printing table can perform precise alignment.

Convenient Adjustment

Erected bridge at inlet entrance of conveyor belts system, enable to uplift pneumatically for operator convenience to close machine adjustment and cleaning.

Three Vacuum Zones

Printing table provides air blow and suction, separate three zones switch and automatically switch on / off depending upon printing stroke to assist glass registration.

Special Roller

Unique special roller to carry glass movement without scratching.

Safety Guard

Emergency stop button / safety protective barrier / procedural chain-locking control for thorough protection.

Full line:

Specification	Metric Units	US Standard Units
Table size (DxW cm)	210 x 224	82⅝" x 88¼"
Maximum printing area (mm)	1200 x 1600	47⅝" x 63⅜"
Minimum printing area (mm)	500 x 600	19¾" x 23⅝"
Max O/D frame size (DxW mm)	1700 x 2100	66⅞" x 82⅝"
Min O/D frame size (DxW mm)	1000 x 1200	39 ⅜" x 47 ¼"
Screen X/Y adjustment (mm)	±10 / ±10	± ⅜" / ± ⅜"
Vacuum hole size (mm)	5mm	¼"
Glass thickness	3mm to 19mm	0.118" - 0.748"
Max glass weight	30kg	66 lbs
Screen cleaning level (mm)	400mm	15 ¾"
Printing head speed	60-920mm/s	2 ⅜" - 36 ¼" per second
Printing head skew angle	±20°	±20°
Peel-off height (mm)	0-50	0-2"
Conveyor belt height (from floor cm)	105 + 3	41 ⅜" + 1 ⅛"
Conveyor belt speed	33-300mm/s	1 ¼" - 11 ¾" per second
Productivity	250 P/H	250 P/H
Electrical power source	3∮, 220/380V, 50/60Hz	3∮, 220/380V, 50/60Hz
Power consumption	6.1kw	6.1kw
Compressed air source	6.3-7.7 kg/cm²	90 - 110psi

SCREEN FRAME HEIGHT: For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").

Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials.