RHSolutionsLLC_ATMA_ATMAOE_MF68_BW_Fade_Cropped (6).jpg

ATMATIC GD720

SEMI-AUTOMATIC GLASS PANEL SCREEN PRINTER
WITH AUTO-REGISTRATION + INLET CENTERING CONVEYOR

Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials. Suitable for printing medium size of flat glass panel, such as partition glass for fridge, air conditioner panel, microwave oven, cooktop, BM for cover lens, etc.

Photo Sensor : used to detect inlet / outlet, inlet position of sensor can be adjusted manually.
Connecting Type Frame Carrier : design of the screen frame holder is applied for connecting type structure, robust structure to support heavy pressure printing large format.
Conveyor Belt : adopt NOK conveyor belt against high friction for glass special application, cylinder transfers the belt up down.
Pusher Registering : adjustable to be continual or mono action to fit regular or irregular shaped glass panel, PEEK material is used for registration pins.
Quick Adjustment : all new design the printing head to incorporate various adjusting structure as angle / depth / pressure of the squeegee and flood coater.
Height Adjustment Knob : height adjustment device is equipped at four corners of frame holder, depending on printing requirement to adjust frame height at lateral side.
Safety Protection : equipped with safety bar and E-stop switch, comprehensive protection.

Specification	ATMATIC GD720 Metric	ATMATIC GD720 US Standard Units
Machine Dimensions	4980mm x 1500mm x 1650mm	196" x 59" x 65"
Machine Weight	2,079 kg	4,584 lb
Cycle speed (non-stop, full speed, full stroke)	300 P/H	300 P/H
Compressed Air Pressure	6.3 - 7.7 kg/cm²	90 - 110psi
Electrical Power	3∮, 220V/380V, 50/60Hz	3∮, 220V/380V, 50/60Hz
Screen Frame Holding System	Pneumatic Cylinder + Check valve	Pneumatic Cylinder + Check valve
Registration Pin Location	Manual adjustment with location indicator	Manual adjustment with location indicator
Registration Pin adjustment	Linked or Individually adjustment, works for rectangle or shaped glass	Linked or Individually adjustment, works for rectangle or shaped glass
Registration Pin Cylinder	Thin cylinder with guiding rails	Thin cylinder with guiding rails
Print Head Bias Angle	±9°	±9°
Squeegee Angle	20° ± 15°	20° ± 15°
Flood Coater Angle	45° ± 20°	45° ± 20°
Number of Registration Pins	Inlet station 4, Print table 8	Inlet station 4, Print table 8

SCREEN FRAME HEIGHT: For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").

Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials.

Get A Quote

Looking for customized printing solutions? I invite you to fill out our Quote form to receive a tailored estimate that meets your specific requirements. Once you submit the form, I'll get back to you quickly to ensure we kickstart your project without delay!

Product Information

Additional Information:

Contact Details

First Name

Last Name

Phone number

Email

Job Title

Company Details

Company Name

Address

City

State

Zip Code

Country