ATMA, ATMATIC GD715 | RH Solutions LLC.

RHSolutionsLLC_ATMA_ATMAOE_MF68_BW_Fade_Cropped (6).jpg

ATMATIC GD715

SEMI-AUTOMATIC GLASS PANEL SCREEN PRINTER
WITH AUTO-REGISTRATION + INLET CENTERING CONVEYOR

Back to Product List

Get a Quote

Photo Sensor : used to detect inlet / outlet, inlet position of sensor can be adjusted manually.
Connecting Type Frame Carrier : design of the screen frame holder is applied for connecting type structure, robust structure to support heavy pressure printing large format.
Conveyor Belt : adopt NOK conveyor belt against high friction for glass special application, cylinder transfers the belt up down.
Pusher Registering : adjustable to be continual or mono action to fit regular or irregular shaped glass panel, PEEK material is used for registration pins.
Quick Adjustment : all new design the printing head to incorporate various adjusting structure as angle / depth / pressure of the squeegee and flood coater.
Height Adjustment Knob : height adjustment device is equipped at four corners of frame holder, depending on printing requirement to adjust frame height at lateral side.
Safety Protection : equipped with safety bar and E-stop switch, comprehensive protection.

Specification	ATMATIC GD715 Metric	ATMATIC GD715 US Standard Units
Machine Dimensions	3980mm x 1400mm x 1650mm	157" x 56" x 65"
Machine Weight	1,800 kg	3,969 lb
Cycle speed (non-stop, full speed, full stroke)	300 P/H	300 P/H
Compressed Air Pressure	6.3 - 7.7 kg/cm²	90 - 110psi
Air Consumption	3.3 L/Cycle	0.12 cubic feet per cycle
Electrical Power	3∮, 220V/380V, 50/60Hz	3∮, 220V/380V, 50/60Hz
Power Consumption	5.6 kw/10.6A	5.6 kw/10.6A
Screen at cleaning level	300mm	11.8"
Printing Speed	70mm to 690mm/sec	2.76" to 27"/sec
Max. Printing Area	700mm x 1500mm	27.6" x 59"
Max O/D Frame Size	1000mm x 1830mm	39.4" x 72"
Screen Fine Adjustment X	±10mm	±0.39"
Screen Fine Adjustment Y	±10mm	±0.39"
Screen Fine Adjustment Z	±2mm	±0.0787"
Screen Frame Holding System	Pneumatic Cylinder + Check valve	Pneumatic Cylinder + Check valve
Peel-Off Height	0 to 16mm	0 to 0.63"
Registration Pin Location	Manual adjustment with location indicator	Manual adjustment with location indicator
Registration Pin adjustment	Linked or Individually adjustment, works for rectangle or shaped glass	Linked or Individually adjustment, works for rectangle or shaped glass
Registration Pin Cylinder	Thin cylinder with guiding rails	Thin cylinder with guiding rails
Print Head Bias Angle	±9°	±9°
Squeegee Angle	20° ± 15°	20° ± 15°
Flood Coater Angle	45° ± 20°	45° ± 20°
Printing pressure depth	10mm	0.39"
Table Size	900mm x 1800mm	35.4" x 70.9"
Table Height	960mm + 60mm	37.8" + 2.4"
Vacuum Area	680mm x 1470mm	26.8" x 57.9"
Vacuum Hole Diameter	Ø 3.0mm	Ø 0.118"
Min. Printing Area	300mm x 500mm	11.8" x 19.7"
Number of Registration Pins	Inlet station 4, Print table 8	Inlet station 4, Print table 8
Size of Registration Pin	Ø 30mm	Ø 1.18"
Inlet Conveyor Speed	70mm to 690mm/sec	2.76" to 27"/sec

SCREEN FRAME HEIGHT: For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").

Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials.

Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials. Suitable for printing medium size of flat glass panel, such as partition glass for fridge, air conditioner panel, microwave oven, cooktop, BM for cover lens, etc.