RHSolutionsLLC_ATMA_ATMAOE_MF68_BW_Fade_Cropped (6).jpg

ATMATIC 60PD

AUTOMATIC GLASS PANEL SCREEN PRINTER

This model is suitable for screen printing small size glass such as glass for appliance, door for microwave oven, partition for fridge, etc. and printing any rigid material as plastic, Acrylic, metal panel.

Features

Entire machine is composed of feeding + printing + unloading section. After feeding conveyor transports the substrate to pre-registration correcting → shuttle table transports the substrate into printing section → shuttle table transports the substrate to unloading section after printing.
Shuttle table with double-work station is driven by servo motor, it is collocated with high precision Linear Guide Rail to attain smooth and stable fast movement, magnetic lock is used for precise positioning.
Nesting bars device adopts Guide Rail Cylinder to match high precise Linear Guide Rail to attain smooth and stable fast movement.
SEW gear motor is used to drive high leading screw rod transmission to lift up screen, ink is not flowed toward lateral side, encoder controls printing stroke precise positioning.
Connecting frame design is applied for screen frame holder, strength structure to suite high pressure full stroke printing.
Motor driven is associated with timing belt and linear guide rail to transmit printing stroke, fast and stable movement to attain repeatability printing accuracy within ±0.02mm.
E-stop is equipped at machine front side, and adding safety bar with safety loop wiring to protect operator security.

Specifications	ATMATIC 60PD Metric	ATMATIC 60PD US Standard Units
Work flow direction	from right to left	from right to left
Max screen frame O/D size	700mm x 850mm	27.56" x 33.46"
Max printing area	400mm x 600mm	15.75" x 23.62"
Min printing area	200mm x 200mm	7.87" x 7.87"
Printing table height	950mm + 30mm	37.4" + 1.18"
Shuttle table speed	1500m/sec	59.6"/sec
Vacuum area	400mm x 600mm	15.75" x 23.62"
Vacuum hole size	Ø 2.0mm	Ø 0.0787"
Screen X/Y fine adjustment	±10mm / ±10mm	±0.39" / ±0.39"
Substrate thickness	2mm to 20mm	0.07874" to 0.7874"
Substrate weight	3kg to 8kg	6.6 lb to 17.6 lb
Screen at cleaning level	270mm	10.6"
Printing speed (digital setting)	125mm to 750mm/sec	4.9" to 29.5"/sec
Cycle Speed (full speed, full stroke, non-stop)	600 P/H	600 P/H
Electrical power	3∮, 220V/380V, 50/60Hz	3∮, 220V/380V, 50/60Hz
Power consumption	2.96kw	2.96kw
Compressed air pressure	6.3-7.7 kg/cm²	90 - 110psi
Air exhaustion	20.1 L/min	0.7 cfm
Machine dimensions	970mm x 1840mm x 3380mm	38.2" x 72.44" x 133.07"
Machine weight	1100kg	2425 lb
Screen at stand-by level	50mm	1.97"
Peel-off height	0 to 20mm	0 to 0.79"
Printing head bias angle	±8°	±8°

SCREEN FRAME HEIGHT: For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").

Equipped with the correcting device at feeding section, shuttle table with double-work station transports the substrate to attain precise centered alignment, nesting bars are equipped at bilateral side for printing edge-to-edge, the substrate is discharged by conveyor belt after printing.

Similar Products

AT-120P

AT-160P

AT-25FA

AT-25PA

AT-25PAD

AT-25PSC

AT-45FA

AT-45PA

AT-45PAB

AT-45PAD

AT-60FA

AT-60FX

AT-60PD

AT-60PPD

AT-68C

AT-70PD

AT-80P

AT-80P/B

AT-80P/SV

AT-80PD

AT-EW120P

AT-EW160P

AT-EW80P

ATMACE 67G6

ATMACE 710G6

Get A Quote

Looking for customized printing solutions? I invite you to fill out our Quote form to receive a tailored estimate that meets your specific requirements. Once you submit the form, I'll get back to you quickly to ensure we kickstart your project without delay!

Product Information

Additional Information:

Contact Details

First Name

Last Name

Phone number

Job Title

Company Details

Company Name

Address

City

State

Zip Code

Country